Roland Swatches for Corel Draw and Illustrator

Roland Swatches for Corel Draw and Illustrator

When you install VersaWorks on your computer, Roland's swatches for Corel Draw and Ilustrator will automatically get installed into the Program Files>VersaWorks>Swatches Directory. If you do not have the ability to retrieve these swatches from this directory, we have uploaded them to our knowledge base for you. See the attachments.

To install these, download the zip file for the software you are using (Corel Draw or Illustrator) and unzip them.

For Corel Draw
If you are using Corel Draw, go to Window>Color Palettes>Open Palette. Now ensure the file type is correct. The default may be xml, but Roland has saved it as a .cpl. Change the file type to .cpl or all files.


For Illustrator:
  1. Find the Swatches section in Illustrator. If you do not see it, go to Window>Swatches.
  2. In the Swatches section, click the button for Swatch Libraries Menu:


    3.  A new window will open. Browse to where you unzipped the Roland Illustrator Swatches you just downloaded from this article and select Roland VersaWorks and click Open:


   4. You should see the Roland VersaWorks Swatches inside of illustrator ready for you to use:



    • Related Articles

    • Switching to V-Bond Inks on Roland UV Printers

      V-Bond Ink is Rolands new line of inks that are more environmentally friendly and safer to handle then past inks. Attached is a guide on switching over to these inks on the LEF2 series UV printers. Most important in the guide is being at the latest ...

    • Universal Laser VLS 3.50/VLS 3.60DT Adobe Illustrator CC Template

      Attached is a template for the Universal Laser System VLS 3.50. This template can easily be changed for other systems by changing the page size.

    • Roland SG3-300/540 Tray Cleaning

      This guide will have you follow steps to run a tray cleaning on your SG3-330/540. Run this process if your printer is requesting you run a tray cleaning.

    • Cut Studio Reinstall

      To reinstall CutStudio follow this link to download the installer https://amtekcompany-my.sharepoint.com/:f:/p/lucas/EpEh_QzrEwtFooSudUuhg40BIHywthLomYqoroxAOA6_IQ?e=vd1zg7 Once downloaded, extract the compressed folder. After the file has been ...

    • LEF Head wash

      Click here for a video showing how to enter service mode. This video shows the process on an Roland SG/VG Printer cutter, but the button sequence is very similar for the LEF/LEF2 systems. Written instructions for entering service mode are also listed ...