Roland SG3-300/540 Tray Cleaning

This guide will have you follow steps to run a tray cleaning on your SG3-330/540.

Run this process if your printer is requesting you run a tray cleaning.

• Related Articles

• SG-Series Head Wash

  Click here for a video showing how to enter service mode. Written instructions are also listed below.

• Switching to V-Bond Inks on Roland UV Printers

  V-Bond Ink is Rolands new line of inks that are more environmentally friendly and safer to handle then past inks. Attached is a guide on switching over to these inks on the LEF2 series UV printers. Most important in the guide is being at the latest ...

• LEF Head wash

  Click here for a video showing how to enter service mode. This video shows the process on an Roland SG/VG Printer cutter, but the button sequence is very similar for the LEF/LEF2 systems. Written instructions for entering service mode are also listed ...

• Roland TrueVis VG/SG Series Printers "Head Protection Activated" Message

  Head Protection Activated. We recently noticed that some of our customers are getting "HEAD PROTECTION ACTIVATED" error message on Roland TrueVis VG/SG print/cut series. Official Roland documentation states that the error might occur in cases when ...

• TR2 Ink Upgrade Process

  https://truevis.rolanddg.com/tr2/download_en.html Upgrade Procedure: Please follow the procedures below to upgrade your TrueVIS VG/SG series printer. STEP 1:Prepare the items required for the upgrade. Have your new TR2 ink (in the same configuration ...