Switching to V-Bond Inks on Roland UV Printers
V-Bond Ink is Rolands new line of inks that are more environmentally friendly and safer to handle then past inks.
Attached is a guide on switching over to these inks on the LEF2 series UV printers.
Most important in the guide is being at the latest firmware version for your printer.
It is also important to replace the wiper and cap tops as these will have trace amounts of old ink and will cause cross contamination with V-BOND inks.
Related Articles
LEF Head wash
Click here for a video showing how to enter service mode. This video shows the process on an Roland SG/VG Printer cutter, but the button sequence is very similar for the LEF/LEF2 systems. Written instructions for entering service mode are also listed ...
Roland TrueVis VG/SG Series Printers "Head Protection Activated" Message
Head Protection Activated. We recently noticed that some of our customers are getting "HEAD PROTECTION ACTIVATED" error message on Roland TrueVis VG/SG print/cut series. Official Roland documentation states that the error might occur in cases when ...
Preparing your Roland InkJet / UV Printer for Extended Downtime
Prepare the Machine for Extended Inkjet Downtime: (Full Instructions attached) We have procedures outlined for preparing these machines for traditional school breaks. These procedures require cleaning cartridges and head washing procedures to carry ...
Roland SG3-300/540 Tray Cleaning
This guide will have you follow steps to run a tray cleaning on your SG3-330/540. Run this process if your printer is requesting you run a tray cleaning.
Cut Studio Reinstall
To reinstall CutStudio follow this link to download the installer https://amtekcompany-my.sharepoint.com/:f:/p/lucas/EpEh_QzrEwtFooSudUuhg40BIHywthLomYqoroxAOA6_IQ?e=vd1zg7 Once downloaded, extract the compressed folder. After the file has been ...