How to Download Connected Components Workbench

How to Download Connected Components Workbench

Many Amatrol learning systems require the user of Rockwell's Connected Components Workbench software. This is a free download, but it can be difficult to find. Follow the steps below:

Step 1: Create a Rockwell account here: https://www.rockwellautomation.com/account/create-account
Step 3: Search "CCW" in the Search Box
Step 4: Click on "Connected Components Workbench"
Step 5: Select the version you need from the list


Steps 3, 4, and 5 are shown in the screenshot above.

Step 6: Click the Download button next to the CCW software version you picked

Step 7: Check the box for the CCW software and any add-ons you'd like, then click Downloads


Step 8: Click Download Now


Here is a video of the process:

    • Related Articles

    • SolidWorks Student Download Instructions

      This article will explain how students can access the downloadable copy of SolidWorks for installation on their personal / home computers. ***** THIS IS FOR STUDENTS TO DOWNLOAD SOFTWARE OUTSIDE OF THE CLASSROOM.  THIS IS NOT YOUR SCHOOL NETWORK ...

    • Changes to the SolidWorks Customer Portal

      SolidWorks has recently migrated their backend systems over to a completely new platform. These changes have caused the previous Customer Portal and Admin Portal to no longer function. Here is how you complete the most common tasks within the new ...

    • F123 Series Front Interface Board Screw Removal

      A mounting bracket screw may contact and cause problems with components of the F123 Series front interface board. Remove and discard this mounting bracket screw. Click any picture below to see it full size. To perform this procedure you will need: ...

    • Re-Formatting the SD card on the Stratasys F123

      This guide will show you the steps to remove the SD card from your Stratasys F series machine for re-formatting. Tools you will need: A computer with a micro SD card reader/ and adapter for a micro sd card. A 3 mm Hex First start by powering down the ...

    • F123 Configuration File via USB

      First insert the USB flash drive into one of the available USB ports on the F123 printer. On the touchscreen, open the Tools page then navigate to Maintenance From the maintenance page, select USB tools then select CFG Save Select the USB and ...