Ultimaker 6.1 Firmware Update Instructions

• Related Articles

• GrabCAD - Update Firmware

  In GrabCAD first select the printer:    Then go to Settings:  If the printer firmware is out of date, it will look like this:  Click on the orange banner.  Then you will see this:   It may take a minute for this orange button to become available, ...

• Updating Job Manager / Firmware on a J35 or J55 via USB Stick

  The video below will show you how to update the Job Manager version on your J35 or J55 via USB Stick

• Updating F123 Firmware via USB

  1- Click here to download the firmware update - As of June 2024 the latest version is 2.7 Build 5984. Release notes are attached to this KB article. 2- Put the .upg file on a USB drive 3- Plug the USB drive into the front of the printer 4 - Go to the ...

• Solidworks - CSWA Instructions

  Someone who manages the SolidWorks license needs to fill out the SolidWorks Academic Certification Provider application found here https://app.smartsheet.com/b/form/7dc24a0f6b394aa7bbebee63428af4d2   They will receive vouchers codes to give out to ...

• SolidWorks Student Download Instructions

  This article will explain how students can access the downloadable copy of SolidWorks for installation on their personal / home computers. ***** THIS IS FOR STUDENTS TO DOWNLOAD SOFTWARE OUTSIDE OF THE CLASSROOM.  THIS IS NOT YOUR SCHOOL NETWORK ...