Related Articles
How to exercise the laser tube in a Universal Laser
The laser tube in a Universal Laser will degrade over time if not used regularly, shortening its life. It's recommended to run or "exercise" your laser during periods of downtime to prevent this from happening. This procedure can also sometimes work ...
Performing a USB Reset on a Universal Laser System
Sometimes windows creates issues with how it communicates with USB ports. When this happens, you will often see your Universal Laser acting strange. Usually, all the functions work properly. You can send a job to the printer, you can change the ...
BOFA Cart with ULS/Start Stop Card will not turn on automatically
BOFA now has the option to add a ULS Start/Stop card to the cart. This allows the Universal Laser to send a 5V signal to a card inside the BOFA to start it automatically. There have been a few cases where this has not worked. The way it should work ...
Universal Laser VLS 3.50/VLS 3.60DT Adobe Illustrator CC Template
Attached is a template for the Universal Laser System VLS 3.50. This template can easily be changed for other systems by changing the page size.
Checking the fuses on a Universal Laser System
To check the fuses on the laser system, follow these steps: 1. Locate the fuse location behind the machine. They are directly below the power inlet: 2. Press in on both sides of the fuse holder and pull the fuse holder out: 3. Get your multimeter out ...