The attached document will walk you through remastering a FANUC robot
This video will detail the process of changing the batteries and then remastering the robot. This is necessary if the batteries die and the robot is not powered on. The batteries should be changed every year with the power on to prevent the loss of servo mastering.
Related Articles
FANUC Battery Replacement Procedure
Periodically the batteries in your FANUC robot need to be replaced. Your teach pendant will prompt you when the batteries are getting low and it is important to replace them promptly to avoid the need to remaster the robot. It is good practice to do ...
FANUC Robot Controller Batter Location
The battery in the FANUC robot controller can last up to 4 years. Replacing it is simple. Open the controller door and swap it out. The photos below will help you understand the location. You can also find the written procedure attached to this ...
FANUC CNC Simulator with Machine Simulation - Windows Boot Issues
FANUC's CNC Simulator with Machine Simulation is a unique training system that incorporates a real FANUC CNC control and a separate embedded Windows PC to simulate the CNC Machine. The end user will connect a computer monitor, mouse, and keyboard ...