Procedure Supplement for Amatrol 990-PS712 Programmable Control System for LAP 2 “Basic HMI Panel Operations

• Related Articles

• Resetting IP Address on Tabletop Mechatronics Micro 820 PLCs

  If you can no longer connect to one or more of your tabletop mechatronics Micro 820 PLCs, the IP address of the PLC may have been changed and needs to be reset. You may be having this issue if you cannot connect to your PLC when you connect the PLC ...

• Amatrol LMS - Adding Site Administrators

  Adding Site Administrators As long as an Administrator has the privilege “Create Users: Can create a user.  Gives access to the Manage Users page”, they should see a button at the top of their screen that says “New Administrator”.   When you select ...

• Adding additional codes to existing Amatrol LMS account

  In some cases, you may receive multiple LMS codes from Amatrol. One example is if you purchased the IGNITE curriculum with the Amatrol main library add on. You may receive an email with two separate codes. In that case, you'd create your account ...

• Universal Laser System Will not Power On

  If your laser system will not power on, check the following items first: 1. Check to see if the power button in the Universal Control Panel (UCP) is grayed out. See image below: If the power button is grayed out, check the following:             1.a ...

• Amatrol LMS - Building a Custom Course

  Building a Custom Course Click Build Custom Course from the Administration pane on the left of the screen From here, click on the + sign to open the library then open the category(s) of your choice.  To create a custom course, you can select modules ...