F123 Manual Calibration Calculator

F123 Manual Calibration Calculator

The attached excel sheet will assist you in manually calibrating your F123 series 3D printer.

A full video of this process can be found here: https://youtu.be/DWT7AY1gcWg

    • Related Articles

    • Re-Formatting the SD card on the Stratasys F123

      This guide will show you the steps to remove the SD card from your Stratasys F series machine for re-formatting. Tools you will need: A computer with a micro SD card reader/ and adapter for a micro sd card. A 3 mm Hex First start by powering down the ...

    • System pausing from a warning on the system stating “material not at the head"

      The real issue is material spin out from many reasons. Four things to check and do for this issue. Model spin out warning, just search “test#” in Nopepad ++  see data below (must unload and reload to fix) Calibrations not performed in correct order ...

    • TR2 Ink Upgrade Process

      https://truevis.rolanddg.com/tr2/download_en.html Upgrade Procedure: Please follow the procedures below to upgrade your TrueVIS VG/SG series printer. STEP 1:Prepare the items required for the upgrade. Have your new TR2 ink (in the same configuration ...

    • Cut Studio Reinstall

      To reinstall CutStudio follow this link to download the installer https://amtekcompany-my.sharepoint.com/:f:/p/lucas/EpEh_QzrEwtFooSudUuhg40BIHywthLomYqoroxAOA6_IQ?e=vd1zg7 Once downloaded, extract the compressed folder. After the file has been ...

    • Universal Start/Stop Override Switch on BOFA Base 1

      If your BOFA Base 1 unit is equipped with the Universal Start/Stop feature, the unit will turn on and off automatically when you start a job on your laser system. This is a very convenient feature as you do not need to remember to manually start your ...