F123 Configuration File via USB

First insert the USB flash drive into one of the available USB ports on the F123 printer.

On the touchscreen, open the Tools page then navigate to Maintenance

From the maintenance page, select USB tools then select CFG Save

Select the USB and navigate to a save file location on the USB drive, then select the download button. Press accept when the download is complete.

• Related Articles

• Exporting the Configuration File for a Mojo 3D Printer

  To obtain the printer's configuration file from your Mojo printer, follow these steps: 1. Open the Mojo Control Panel. This will typically be found in the Windows System Tray, which is the area in the lower right corner of your Windows desktop where ...

• GrabCAD - Get configuration file

  In GrabCAD select the printer in the bottom right of the workspace:  Then go to Settings and click on Export printer configuration. Save the file and send back to us. 

• Catalyst - Get configuration file

  In the Catalyst software go to the Printer Services tab:   Then click on Export Configuration:   The file will have a .cfg extension, save that and send back to us.  

• Updating Job Manager / Firmware on a J35 or J55 via USB Stick

  The video below will show you how to update the Job Manager version on your J35 or J55 via USB Stick

• Updating F123 Firmware via USB

  1- Click here to download the firmware update - As of June 2024 the latest version is 2.7 Build 5984. Release notes are attached to this KB article. 2- Put the .upg file on a USB drive 3- Plug the USB drive into the front of the printer 4 - Go to the ...