If you would like to learn more about using your Creaform 3D Scanner, download and 3D printer the attached file and use it to follow along in the videos linked below.
In GrabCAD select the printer in the bottom right of the workspace: Then go to Settings and click on Export printer configuration. Save the file and send back to us.
To obtain the printer's configuration file from your Mojo printer, follow these steps: 1. Open the Mojo Control Panel. This will typically be found in the Windows System Tray, which is the area in the lower right corner of your Windows desktop where ...
In the Catalyst software go to the Printer Services tab: Then click on Export Configuration: The file will have a .cfg extension, save that and send back to us.
In some cases, the blue material tube pops off of the head during the auto load procedure in the F123 series. Future revisions of the print heads will address this, but a current work around is to print out the Pop fix STL and install it on the head. ...
Click on the links below to view the unboxing/setup videos for the following machines: Compac Mini: https://youtu.be/Vm3xJ2DQfcM 450DT: https://youtu.be/6hRNrZoytnM 508DT: https://youtu.be/Y3Ic8cJmqVw