Catalyst - Get configuration file

In the Catalyst software go to the Printer Services tab:  

Then click on Export Configuration:  

The file will have a .cfg extension, save that and send back to us.  

• Related Articles

• GrabCAD - Get configuration file

  In GrabCAD select the printer in the bottom right of the workspace:  Then go to Settings and click on Export printer configuration. Save the file and send back to us. 

• Exporting the Configuration File for a Mojo 3D Printer

  To obtain the printer's configuration file from your Mojo printer, follow these steps: 1. Open the Mojo Control Panel. This will typically be found in the Windows System Tray, which is the area in the lower right corner of your Windows desktop where ...

• F123 Configuration File via USB

  First insert the USB flash drive into one of the available USB ports on the F123 printer. On the touchscreen, open the Tools page then navigate to Maintenance From the maintenance page, select USB tools then select CFG Save Select the USB and ...

• Objet - Get log files

  In the Control Panel (printer software) go to Options / Collect Service Data: A window will open that shows the zip files with dates that are in European format, so the day is first, month, then year. Insert a USB storage device into a USB port at ...

• Pop Fix STL File

  In some cases, the blue material tube pops off of the head during the auto load procedure in the F123 series. Future revisions of the print heads will address this, but a current work around is to print out the Pop fix STL and install it on the head. ...